The CMC Quattro is a highly accurate electronic control and metering system. It can be employed everywhere where fluids need to be metered, portioned and controlled exactly. The CMC Quattro will monitor every process and can be controlled remotely by any billing system, thanks to its RS323 interface.
Maximum System
4 groups (keypads) with 5 portions (keys), 2 level sensors, 1 timer
Group System
4 lines 1 multi-function key (stop/free running or fifth portion) A single ribbon cable (optional) connects all keypads
Power Supply
230V~ standard, 115V~ on request
Interface
RS232 (optional)
Flowmeter
all DIGMESA Flowmeters, except 4 Pin-versions (FF-SIG).
Up to four groups are connected to the control electronics through a single ribbon-cable. Addressing is achieved by jumpers on the back of the unit. So only one keyboard is needed, which can be adapted to suit the desired group at any time. Whether it is for a coffee-machine, bar dispensing systems or other applications in the industrial or chemical sector: the keypad layout can be adapted to individual customer requirements.
The microprocessor electronics monitors and records up to 16 lines. It is possible to call up each line on the LCD locally at any time. The FCD III also provides RS232 interface(RS485 on request), for computer connection. With attached flow sensor with foam recognition (sm, 4pin), it is possible to attach an extension line (barrel empty), or an external alarm (barrel change-over, acoustic indicator).
Basic System
1 modul for 4 lines
Maximum System
4 modules each for 4 lines for administration of 16 lines total, subsequent extension is possible.
Power Supply
230V~ standard, 115V~ on request
Interface
RS232 standard, RS485 on request
Flowmeter
all DIGMESA Flowmeters
Supply Specification
cable connections, 1 master key and one key for cleaning (cleaners key)
The FC Flowcontroller (without limit) is the single-line version of the FCD III. Remote interrogation is not available. When used in combination with DIGMESA Flow Sensors, it will permit the most simple and accurate measurement and control of fluids. With the FC Programmer, the FC Flowcontroller can be pre-programmed with the desired limit values or number of impulses. It is therefore extremely suitable for the monitoring of decalcifiers, ion-exchangers or activ carbon filters, being used for cleaning ans detoxifying of water. A zero setting is carried out the reset button; the last 24 values are stored and will remain intact even in the event of a power cut. To prevent manipulation, the FC can also be supplied with a reset cable (for key switches).
Power Supply
230V~ standard, 115V~, 12-24V~ on request
Flowmeter
all DIGMESA Flowmeters, except 4 Pin-versions (FF-SIG).
The FC-Programmer is used to program and alter pulse and limit values of the FC Flow-Controller. It can be used for any additional FC, so it is not included.
